Precision Adhesive Dispensing Machines. Designed in Pune. Trusted Across India.
Designed and engineered in Pune. Built for accurate, repeatable and reliable adhesive application across Indian industry.
100+
ACTIVE INSTALLATIONS
7+
INDUSTRY VERTICALS
3
YEARS R&D BEFORE LAUNCH
2K
METER-MIX CAPABILITY
Why ADoST Exists
THE PROBLEM WITH HOW ADHESIVE IS APPLIED.
01
Too much adhesive
Excess adhesive increases material consumption, adds to cost and can contaminate adjacent surfaces or compromise assembly.
02
Too little adhesive
Insufficient adhesive can compromise joint strength, create field failures and generate warranty and rework costs.
03
Operator-to-operator variation
Manual dispensing produces inconsistency between operators, between shifts and between batches affecting overall product quality.
04
Difficult application paths
Complex bead paths or tight component geometries can make reliable manual adhesive application impractical at production speed.
We believe adhesive dispensing should not depend on operator judgement alone. ADoST was created to bring greater precision, repeatability and process control to adhesive application to make adhesive dispensing a predictable, measurable and repeatable part of the manufacturing process.
PRODUCT PORTFOLIO
WHAT
WE BUILD.
From benchtop volumetric dispensing machines to advanced robotic and 2K meter-mix systems, ADoST builds dispensing solutions engineered around your adhesive and application, including precision glue dispenser machines.
Pressure-Time Dispensing Systems
Time-pressure control for low-to-medium viscosity adhesives. Simple, reliable, cost-effective.
Volumetric Dispensing Machines
Positive-displacement metering for accurate, repeatable shot volumes regardless of viscosity variation.
Meter Mix Dispensing Machines
Precise ratio control for two-component epoxy, polyurethane and silicone adhesives and sealants.
Cartridge Dispensing Units
Pneumatic drive for pre-filled cartridge systems. Ideal for cyanoacrylate, UV and anaerobic adhesives.
Precision Dispensing Valves
Needle, snuff-back and jetting valves engineered for exact dot, bead and fill dispensing.
3-Axis Robotic Dispensing Systems
Benchtop gantry automation for consistent bead paths and fill patterns on complex geometries.
3-Axis Large Gantry Systems
High-travel robotic dispensing for large-format panels, EV battery trays and structural bonding.
ENGINEERING APPROACH
THE APPLICATION
COMES FIRST.
There is no universal dispensing system for every adhesive or every production process. The right solution depends on the adhesive’s viscosity, curing characteristics, required dispense volume, bead geometry, component design, cycle time, production environment and level of automation required.
At ADoST, we begin with the application. We study the adhesive, understand the component and determine what the manufacturing process actually requires before engineering the dispensing solution.
ADHESIVE → SYSTEM → APPLICATION → PROCESS
VISCOSITY & CURING
Adhesive Analysis
VOLUME & GEOMETRY
Dispense Engineering
CYCLE TIME
Process Matching
AUTOMATION LEVEL
System Specification
RESEARCH & DEVELOPMENT
ENGINEERED
FOR THE
SHOP FLOOR.
Consistent dispensing isn’t just about precise mechanics it requires a deep understanding of adhesive chemistry under varying temperature, pressure and operational conditions. Before ADoST launched its first commercial machine, we spent three full years in R&D analysing fluid mechanics under sustained industrial use.
We engineered our systems to eliminate the common challenges of the Indian shop floor: ambient thermal shifts, varying operator skill levels, and aggressive production cycles.
Built In-House
ADoST designs and develops its core engineering in-house. Multi-disciplinary R&D teams spanning fluid dynamics, motion control, embedded electronics and mechanical design.
Proprietary Technology
Custom hardware architecture and intuitive software built specifically for dispensing applications — not adapted from generic industrial automation.
Customer-Led Validation
Before any ADoST machine reaches the standard catalogue, it undergoes rigorous validation on real customer shop floors real shifts, real operators, real line variables.
DESIGNED IN PUNE. BUILT IN INDIA.
PUNE
CHAKAN.
AT THE
CENTRE OF
INDIAN MFG.
ADoST’s engineering and product development activities are based in Pune, Maharashtra one of India’s major automotive and industrial manufacturing hubs. Our manufacturing and assembly operations are located in Chakan, placing us close to the customers and industries we serve.
This proximity allows our engineering team to work directly with manufacturers, understand application challenges and develop solutions around actual production requirements. We design for Indian manufacturing because we work alongside Indian manufacturers.
Engineering & R&D
Pune, Maharashtra
Manufacturing & Assembly
Chakan, Pune
Service Coverage
Pan-India
100+ INSTALLATIONS
TRUSTED
ACROSS INDUSTRY.
ADoST systems are already being used by manufacturers across India for applications where adhesive dispensing accuracy and repeatability matter.
Automotive
EV & Battery
Electronics
Medical Devices
Engineering
Industrial Mfg.
Defence
From individual dispensing workstations to automated robotic applications designed to integrate into the way modern factories actually operate.
THE ADOST EXPERIENCE CENTRE
SEE THE APPLICATION BEFORE YOU BUY THE MACHINE.
CHAKAN, PUNE — APPLICATION TESTING FACILITY
At the ADoST Experience Centre in Chakan, Pune, customers can evaluate dispensing technologies, test applications and understand how different dispensing systems perform with their adhesive and components.
Bring your adhesive, components, drawings, dispensing requirements or existing application problems. Our team will work with you to identify and demonstrate a suitable dispensing approach.
CHAKAN, PUNE — APPLICATION TESTING FACILITY
ADHESIVE EXPERTISE
WE
UNDERSTAND
MORE THAN
THE MACHINE.
ADoST has evolved from a business with deep experience in industrial adhesives and their applications. Our association with Elixir-India an established adhesive and application engineering business gives us exposure to the practical challenges manufacturers face when working with industrial adhesives.
” A dispensing machine can be mechanically precise and still deliver a poor result if the dispensing technology is not suited to the adhesive or application. ”
This is why the engineering begins with understanding the adhesive not with selecting a machine from a catalogue.
ENGINEERING PHILOSOPHY
SMART
Technology should simplify the manufacturing process, not complicate it. Every ADoST interface and control system is designed for the operator, not the engineer who built it.
REPEATABLE
Every component should receive the intended quantity of adhesive, cycle after cycle, shift after shift. Repeatability is the foundation of consistent product quality.
PRECISE
Dispensing should be controlled to the requirements of the application, with the accuracy the process demands not more, not less.
GET STARTED
LOOKING FOR
AN ADHESIVE
DISPENSING
MACHINE?
Whether you are replacing manual adhesive application, improving an existing dispensing process or looking to automate a production operation, our team can help you evaluate the right solution.
Tell us about your adhesive, component and application. We will help you determine the dispensing technology that fits your process.
PUNE / CHAKAN
+91 89560 79438
